RATIO HÖN

Racionalan crijep velikog formata

  • Zahvaljujući velikom formatu od 265 x 446 mm omogućuje velik stupanj ekonomičnosti
  • Fleksibilna duljina pokrivanja za brzo polaganje zahvaljujući području pomicanja od 24 mm
  • Mogućnost pomicanja od 5 mm nudi dovoljno fleksibilnosti i u širinu
  • Bogata paleta boja: 11 boja u četiri varijacije površine
  • Skladan oblik nastao na temelju tradicionalnog modela Z1 kuće Ludowici
  • Bočno postavljena skretnica vode rasterećuje bočni utor i osigurava optimalno provođenje vode
prirodno crvena
prirodno crvena
NUANCE crvena engobirana
NUANCE crvena engobirana
NUANCE bakreno crvena engobirana
NUANCE bakreno crvena engobirana
NUANCE boja crnog vina engobirana
NUANCE boja crnog vina engobirana
NUANCE starosiva engobirana
NUANCE starosiva engobirana
NUANCE antracit engobirana
NUANCE antracit engobirana
FINESSE crvena glazirana
FINESSE crvena glazirana
FINESSE boja crnog vina glazirana
FINESSE boja crnog vina glazirana
FINESSE crna glazirana
FINESSE crna glazirana
NOBLESSE smeđa glazirana
NOBLESSE smeđa glazirana

Technical data

Dimenzije(cca.)265 x 446 mm
Srednja pokrovna širina(cca.)223 mm
Maks.pokrovna širina(cca.)225 mm
Min.pokrovna širina(cca.)221 mm
Letvanje preporučeno(cca.)368 mm
Maks. letvanje(cca.)380 mm
Min.letvanje(cca.)357 mm
Utrošak crijepa prosječno(cca.)12.2 kom/m²
Maks.utrošak crijepa12.7 kom/m²
min. utrošak crijepa (cca.)11.7 kom/m²
Masa po m²(cca.)40.3 kg/m²
Masa palete(cca.)975 kg
Masa po komadu(cca.)3.3 MENGENEINHEIT#KGPROST
Komada na paleti288 komad
BETON I VLAKNO CEMENT6 piece

Area of use

VALID FOR GERMANY
Nagib krova DUO extra (D)≥ 16 °
Nagib krova QUATTRO longlife extra (D)≥ 10 °
Nagib krova TRIO extra (D)≥ 14 °
Nagib krova DUO longlife ND extra (D)≥ 14 °
VALID FOR AUSTRIA
Nagib krova DUO longlife ND extra (A)≥ 22 °
Nagib krova DUO extra (A)≥ 22 °
Nagib krova QUATTRO longlife extra (A)≥ 20 °
Nagib krova TRIO extra (A)≥ 22 °

Technical informations

  • The technical drawing shown is merely an example.
  • According to the Central Association of the German Roofing Trade (ZVDH) rules for verge tiles, the distance between the inner edge of the verge lug and the outer edge of the gable wall or cladding must be at least 1 cm.
  • Current national rules and standards apply to the execution of roofing work. These vary from country to country (e.g. ZVDH Rules, Austrian Standards) and must be taken into consideration during execution. As manufacturer's information, CREATON-specific information about the execution of the sub-roof is also applicable and is complementary to these. You can find them in our Roof Planner or at www.creaton.de / www.creaton.at.

LAF-/FLA-VALUES

LAF-/FLA VALUES IN MM FOR 30x50-BATTENS
Ridge tileDN15°20°25°30°35°40°45°50°
PH 2.5 pcs./m.FLA9580757065555555
PH 2.5 pcs./m.LAF6055505045454030
LAF-/FLA VALUES IN MM FOR 40x60-BATTENS
Ridge tileDN15°20°25°30°35°40°45°50°
PH 2.5 pcs./m.FLA10590858075656565
PH 2.5 pcs./m.LAF6055454540403015
LAF-/FLA VALUES IN MM FOR 50x50-BATTENS
Ridge tileDN15°20°25°30°35°40°45°50°
PH 2.5 pcs./m.FLA115100959090808085
PH 2.5 pcs./m.LAF555040403030205

Downloads